Mechanical Engineering Magazine

This magazine provides coverage and analysis of the many industries and technologies in which mechanical engineers play significant roles. For information on subscribing to Mechanical Engineering magazine, call 1-800-THE ASME.

Visit Mechanical Engineering Magazine Online >>>
 

Inspection and Quality Assurance for General Purpose Fasteners

This standard outlines a quality assurance plan for internally and externally threaded fasteners and accessories or associated parts. provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. included in this plan are fasteners for general purpose applications, such as those where hand assembly is employed and cost is probably of prime consideration. this plan relies on judicious manufacturing controls and inspections by the producer and, should a dispute arise, provides an inspection plan for lot compliance after shipment. this standard will be used in conjunction with other accepted standards for product, testing, gauging, and material and, therefore, those provisions as well as packaging are not included herein.

 Order The Book
Online >>>
 

Handbook of Bolts and Bolted Joints

Presents time-tested standard as well as reliable emerging knowledge on threaded fasteners and joints—showing engineers how to select parts and materials, predict behavior, control assembly processes, and solve on-the-job problems.

 Order The Book
Online >>>
 

Annual Book of ASTM Standards 2003, Volume 01.08 -Fasteners, 637 pages, 72 standards. Book and disc available.

This volume covers the specifications which establish the property requirements for various internally and externally threaded fasteners, and several which focus on non-threaded and driven fasteners such as rivets, spikes, and washers. Also included are several quality assurance standards for fasteners.

Buy the book >>>

Fastener Standards - Seventh Edition - 2003

Inch Fastener Standards, 7th Edition provides a summary of 104 North American fastener standards prepared by ASME, ASTM, SAE and IFI. This book contains valuable technical guidance in selection of materials, coatings and finishes, threads, products, hole sizes, and quality assurance. Additionally, it includes an introduction to design of bolted joints, terminology, and product weights. Designers, engineers, specifiers, and purchasers will find valuable technical information to assist in their daily activities in design, application, selection, and purchasing.

Buy the book >>>

Inspection and Quality Assurance for Special Purpose Fasteners

This standard outlines a quality assurance plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping.

Buy the book >>>

 Blueprint Reading Basics
Manufacturing Print Reading
Third Edition

 Order The Book
Online >>>

Industrial Fasteners Training Manual

This book is in wide use as a technical reference for engineers, draftsmen, and designers.

 Order The Book
Online >>>

Illustrated Sourcebook of
Mechanical Components

 Order The Book
Online >>>

Contact K-J Fasteners, Inc.,  1572 East 365th Street, Eastlake, OH 44095, ph. 440-951-5095, TOLL FREE: 1-888-834-LION (5466), fax 440-951-9269, jwoltman@kjfasteners.com, visit www.kjfasteners.com.

K-J Fasteners
Call Toll Free
1-888-834-LION
Visit website >>>
 

ASTM Standards Related to Materials, Coatings, and Testing for Fasteners

This new edition contains 29 fastener-related standards that are frequently used or referenced by engineers and end users in conjunction with ASTM fastener standards. The standards were compiled from 11 volumes of the Annual Book of ASTM Standards, with the exception of Volume 15.08/Fasteners -- making this publication a must-have companion to Volume 15.08.

In addition, almost all of the standards cited in the Fastener Quality Act are included in both of these volumes. A useful resource for producers and users in the fields of shipbuilding, boiler and pressure vessels, utilities, railroads, and structure construction.

 Order The Book
Online >>>
 

ISO Standards Handbook - Fasteners & Screw Threads

Two volumes, totaling 186 ISO standards, address the most commonly used fasteners for general application including the necessary standards for tolerances, mechanical and functional properties and testing. These volumes also include standards on terminology, designation, marking and acceptance, and other necessary basic standards. Fasteners and screw threads for aerospace construction are not included.

 Order The Book
Online >>>